Alarm and Home Automation

Intelligent Touch Tone controlled Relays for Access Control

Our LCU lock control units are intelligent programmable devices with either 1 or 2 internal dry relay contacts, which can be used to control an external device or provide for access or lock control. They are designed to connect to the telephone line in parallel, at any point and you can fit multiple units to a single line. Codes can be any 1 to 4 digit number and the relay can close from 1 to 99 seconds when the code is detected

Model LCU-1 - provides for control of 1 dry relay contact.

 

Model LCU-2 - provides for independent control of 2 dry relay contacts

Alarm Interface Module

Our inexpensive AIM alarm interface module accessory is designed to operate with our model DS6 door station controller and any security alarm system that provides a set of external contacts that close or open whenever the alarm is enabled or disabled. DS6 has the ability to DIAL OUT and connect a visitor that has pressed the call button on any of our door phones to a pre-programmed telephone number (usually a mobile telephone) if the site is unattended. By incorporating the AIM accessory with the alarm panel, DS6 can be instructed to DIAL OUT IMMEDIATELY whenever the alarm is enabled and to RING internally when the alarm is disabled.