EFT-POS SWITCH

Will allow your EFT-POS DEVICE to share an existing Voice, Fax, Modem or PABX Telephone Line.

• Save $40.00 per month in Unnecessary Rental Costs

• Save Unnecessary Line Installation Costs

• Ideal for businesses that use an EFT-POS device on an occasional basis.

• Can also be used with your PABX or other Multi-Line telephone.

EFT-POS SWITCH has been designed to allow an occasionally used EFT-POS device to share an existing Voice, Fax, Modem or other line. This will save the installation and ongoing rental costs associated with operating a separate telephone line.

EFT-POS SWITCH will not affect the normal operation of the telephone line that it is connected to. Incoming and outgoing telephone calls will take place exactly as they always have.

EFT-POS SWITCH will automatically connect your EFT-POS device to the telephone line as soon as it has been activated by the user, (providing the line is not in use) so that it can process the transaction.

An EXCLUSION FACILITY is provided to ensure that any other attached telephone device(s) can not interfere ('Barge-In') on the EFT-POS device while it is processing a transaction. If the telephone line is already in use when the EFT-POS device attempts to initiate a transaction, it will be blocked from the line and will not be allowed access to the line until the line is free.

EFT-POS SWITCH can be used with a PABX or Multi Line Telephone System. This is done by connecting the TELEPHONE LINE port of the unit direct to an incoming analogue telephone line, prior to the system controller. The PRIMARY DEVICE port is then connected to your Multi Line Telephone System. The EFT-POS SWITCH port is then connected to the EFT-POS device.

Save on Monthly Rental Costs (typically $40.00 per month).
Save on New Line Installation Costs (typically $200 per installation).

EASY USER INSTALLATION

1. Remove all devices from the Telephone socket to be used.

2. Using a telephone line cable, connect the EFT-POS Switch direct to your Telephone Socket.

3. Using the supplied cable, connect your EFT-POS to the EFTPOS DEVICE port of your EFTPOS switch.

4. Using the other supplied cable, connect your OTHER DEVICE to the PRIMARY DEVICE port of your EFTPOS switch.

5. Connect the supplied 12V plug pack to POWER and your installation is complete.

PABX INSTALLATION

EFTPOS SWITCH can also be used with ANY PABX, Commander or other  Multi Line Telephone System.

This is done by connecting the Telephone LINE IN port of the  EFTPOS Switch direct to an incoming telephone line, prior to the system controller.

The EFTPOS SWITCH port is then connected to the EFTPOS device.

The PRIMARY DEVICE port is then connected to the appropriate line input of the PABX, Commander or  Multi Line Telephone System.

An EXCLUSION FACILITY is provided to ensure that the EFTPOS device cannot ‘Barge-In’ on a telephone call and a Telephone call cannot ‘Barge-In’ on an EFTPOS transaction.

If the telephone line is already in use when the EFTPOS device attempts to initiate a transaction, it will be blocked from the line and will not be allowed access to the line until the line is free.
 
It will be necessary to have this installation done by a suitably qualified Telephone Technician.

You can DOWNLOAD a copy of our BROCHURE and USER GUIDE 

by 'clicking' the DOCUMENTATION Tab next to Image below