Loading...

Line Selector

LINE SELECTOR

TWO LINE SWITCH

 

                           

 

 

LINE SELECTOR will allow ONE TELEPHONE DEVICE to be connected to TWO separate telephone lines.

This means that you can connect your EFT-POS, Cordless Phone, Fax Machine or ANY other Telephone Device to Two Telephone lines.

 

 

 FEATURES

  • Connect One Telephone Device to Two Separate Telephone Lines

  • Suitable for Faxes, Modems, Cordless Telephones or Any Device

  • Connect to Any Two Lines - Standard Telecom, PABX, ISDN or even VOIP

  • Automatically Receive Calls from either line

  • Make calls on either line

 

OPERATION

 

One of the Two attached lines is nominated as the DEFAULT LINE (marked LINE 1 on Line Selector) and the other line is then set up as the ALTERNATIVE LINE (marked LINE 2 on Line Selector).

LINE SELECTOR will always choose the DEFAULT LINE (Line 1), unless you press the Line Change Code (which is programmable for any single digit) or it can also be set to select Line 2 whenever Line 1 is busy.

Incoming calls on EITHER LINE will be automatically routed to the attached device. If the attached device is already connected to a call when another call comes in on the other line, the call can be taken by any other device that may be connected to the same line.

Alternatively, if you are using an automatic receiving device such as a Fax Machine, Modem or Answering Machine to handle both lines, you may wish to use the switch selectable BUSY OUT facility, which if enabled, will automatically 'BUSY OUT' the other line whenever your attached device is operating.

LINE SELECTOR also provides a CALL ADVICE FACILITY, which if enabled will alert you of another call on the other line (with beeps), and will allow you to place the existing call On Hold, so that you can answer the other incoming call. You can then 'toggle' between calls as necessary by pressing *, or you can simply hang up on one call in which case you will be automatically connected to the other call.

Alternatively, if you are using an automatic receiving device such as a Fax Machine, Modem or Answering Machine to handle both lines, you may wish to use the switch selectable BUSY OUT facility, which if enabled, will automatically 'BUSY OUT' the other line whenever your attached device is operating.

 

EASY USER INSTALLATION

 

  1. Using the supplied connectors, Connect your Telstra Service to the port labeled LINE 1.

  2. Connect your Alternative Telephone Line service (or VOIP service) to the port labeled LINE 2.

  3. Connect one or more telephones to the port labeled PHONE.

  4. Connect the supplied 12V plug pack to POWER and your installation is complete.

 

 

 FEATURE TABLE

Feature Make Outgoing Calls on Either Line Receive Incoming Calls on Either Line Programmable Line Change Code Programmable Line Change Delay Other Line Call Advice Facility Other Line Busy Out Facility Automatic Line Change when Busy
               
  Yes Yes Yes Yes Yes Yes Yes

 

MAKE OUTGOING CALLS ON EITHER LINE

Line Selector will allow you to MAKE Outgoing calls on BOTH attached telephone lines.

 

RECEIVE INCOMING CALLS ON EITHER LINE

Line Selector will allow you to RECEIVE Incoming calls on BOTH attached telephone lines.

 

PROGRAMMABLE LINE CHANGE CODE

Outgoing calls are automatically connected to the Default Outgoing line. To make an outgoing call on the alternative line, you must first press *. 

You can change the * Line Change code to any other single digit code. 

 

PROGRAMMABLE LINE CHANGE DELAY

Whenever the ALTERNATIVE LINE is selected to make an outgoing call, there is a short delay after detecting *.

You can change the Line Change delay time anywhere between immediate and 9 seconds.

 

OTHER LINE CALL ADVICE FACILITY

LINE SELECTOR can be set to inject 'Call Advise Tones' into your Line 1 or Line 2 call to alert you that you have an incoming call on the other line. It will also allow you to place the existing call ON HOLD and allow you to ANSWER the other call by pressing * on your telephone. You can return to the other call at any time by pressing *, or toggles between calls.

 

OTHER LINE BUSY OUT FACILITY

LINE SELECTOR will allow you to individually 'Busy Out' Line 1 or Line 2, when the other line is in use.

This means that you can prevent being disturbed on your primary line (or both lines) from calls on the other line.

 

AUTOMATIC LINE CHANGE FACILITY

LINE SELECTOR can be set to automatically select Line 2 to make outgoing calls whenever Line 1 is in use.

This saves the need to press the Line Change command. This flexibility can be useful for certain applications, including the use of automatic dialling equipment.

 

 

 

You can DOWNLOAD a copy of our LINE SELECTOR BROCHURE and USER GUIDE  

by 'clicking' the Image Link below and then 'clicking' the DOCUMENTATION Tab

 


 
 

Line Selector

Line Selector Two Line Switch

Price: $199.00

In stock

CODE: LS