Loading...

Telephone Line Simulators

RING MASTER

  

Telephone Line Simulators

with Distinctive Ring, International Ring and CallerID capabilities

Our RingMaster Telephone Line Simulator devices are designed to allow ANY TWO TELEPHONE devices to communicate, at distances up to 1 Mile, without the need to connect to a telecom line, which would otherwise require 2 separate telephone lines.

Our RingMaster devices are compact, reliable and can be conveniently used on any test bench, or even in the field.

Operation is bi-directional so that either telephone device can make or receive telephone calls. Connection quality is loud and clear just like a telephone line, allowing for reliable Modem connection at maximum modem speeds. Connection is provided with a line voltage of 24VDC, which is the same voltage as most PBX equipment.

Common applications for these devices include:

  • Testing

  • Training

  • Development

  • Demonstration

  • Production Line Quality Control Testing

 

 


FOUR MODELS TO CHOOSE FROM

RINGMASTER STD


RINGMASTER STD is our simplest device and is suitable for use with MOST telephone equipment. RingMaster STD allows for one attached device to ring the other device by simply lifting either receiver (ie going 'off hook').

Operation is fully bi-directional, with line voiltage of 24VDC.

As soon as the first device goes 'off hook', it will ring the other device with the standard US RING (or optional UK Ring) until the other device answers. Once the second device answers, RingMaster STD will provide both devices with a 'noise free' telephone line connection, so that they can communicate. Connection will cease as soon as one devices 'hangs up'.  

RINGMASTER STD does not provide 'Call Progress Tones', such as Dial Tone, Busy Tone and Hang Up tone. This means that RingMaster STD cannot be used with equipment (such as a modem) that requires 'dial tone' before they will dial. You will need to use our other RingMaster models, as described below :

RINGMASTER PRO

RINGMASTER PRO is a sophisticated device that accurately emulates all of the USA telephone line characteristics, including all 'Call Progress Tones'. RingMaster PRO operates the same as a telephone exchange. Therefore when the first devices goes 'off hook', it will provide 'US Dial Tone'.

Operation is fully bi-directional, with line voiltage of 24VDC.

To initiate a call, you should press or dial 0 on either attached device. RingMaster PRO will then ring the other device with standard US RING (or optional UK Ring) until the other device answers. Once the second device answers, RingMaster PRO will provide both devices with a 'noise free' telephone line connection, so that they can communicate. Connection will cease as soon as one device 'hangs up', at which time it will then generate 'US Hang Up Tone'. If the other device is already 'off hook' when you attempt to make a call, RingMaster PRO will generate 'US Busy Tone'. Operation of this product is fully bi-directional.

RINGMASTER PRO provides all 'Call Progress Tones', such as Dial Tone, Busy Tone and Hang Up tone. This means that RingMaster PRO can be used with equipment (such as a modem) that requires 'dial tone' before they will dial.

RINGMASTER PRO can also output all standard 'Distinctive Rings' that are used in the  US. The 4 Distinctive Ring patterns are initiated by dialling 1 through to 4, instead of the normal 0.

 

RINGMASTER CLI

Note :  This product only provides USA Telephone LIne Emulation, including USA Dial Tone, Busy Tone and CLI.

RINGMASTER CLI provides all of the features and facilities of our RingMaster PRO device, and in addition also provides for Calling Line Identification (CLI) data transmission, which in the USA. It does not generate CLI suitable for use with UK Telephone Devices.

RINGMASTER CLI has been pre-programmed with 10 separate CLI data transmissions, consisting of a range of Telephone Number, Date and Time data that can be used to comprehensively test the detection and display facilities of equipment which supports this service. One CLI pattern also provides Alphanumeric output, which can be used to test equipment that also supports NAME data that may be sent with future CLI transmissions. RingMaster CLI will also allow you to enter and transmit your own entered telephone number.

RINGMASTER CLI data is transmitted whenever a second digit is dialled (digits 0-9). However, if only 1 digit is dialled, RingMaster CLI will not generate CLI data on this call, but will simply initiate a call with the appropriate Ring Output required (this product also provides all 'Distinctive Rings' that are used in the USA).

1 EXPORT MODEL ONLY - This device is available only in AUSTRALIAN and USA models at this time.

 

CLI OUTPUT INFORMATION

 

NUMBER INFORMATION TRANSMITTED TELEPHONE NUMBER
Dial 00 NATIONAL COMM. 04/15 14:30 0755965128
Dial 01 05/02 16:31 654321
Dial 02 06/09 18:45 03123456
Dial 03 07/18 20:52 9876543210
Dial 04 08/11 01:13 8888888888
Dial 05 09/25 05:28 3456789
Dial 06 10/30 15:04 0223456789
Dial 07 12/31 13:07 0418765432
Dial 08 01/04 09:59 O (out of area)
Dial 09 02/03 2:00 P (private)

RINGMASTER INTERNATIONAL

RINGMASTER INTERNATIONAL emulates the telephone line characteristics of over 20 separate countries.

Country specific Ring Output, Dial Tone, Busy Tone and Hang Up tone are provided.

Operation is fully bi-directional, with line voiltage of 24VDC (as provided by most PABX devices).

Specific Country emulation is selected by setting the position of 4 dip switches, located on the underside of the unit (see table below). Changing emulation from one country to another can be achieved in seconds.

COUNTRY EMULATION IS SELECTED BY DIP SWITCHES

LOCATIONDIP SWITCHES 1, 2, 3, 4
AUSTRALIAONONONON
USA & CANADAOFFONONON
UNITED KINGDOMONOFFONON
FRANCEOFFOFFONON
GERMANYONONOFFON
ITALYOFFONOFFON
SWEDENONOFFOFFON
SPAINOFFOFFOFFON
NETHERLANDSONONONOFF
FINLANDOFFONONOFF
BELGIUMONOFFONOFF
RUSSIAOFFOFFONOFF
INDIAONONOFFOFF
CHINAOFFONOFFOFF
JAPANONOFFOFFOFF
SINGAPOREOFFOFFOFFOFF
* NEW ZEALAND is the same as AUSTRALIA
** NORWAY, SWITZERLAND and POLAND are the same as NETHERLANDS

 

 
 You can DOWNLOAD a copy of our RINGMASTER BROCHURE and USER GUIDE 

by 'clicking' the Image Link below and then 'clicking' the DOCUMENTATION Tab  


 

 
B0006HPCLY.01._SCLZZZZZZZ_.jpg Ring Master - International

AU $349.00

RingMaster INTERNATIONAL  emulates the telephone line characteristics of over 20 separate countries. Country specific Ring Output, Dial Tone, Busy Tone and Hang Up tone are provided. Operation is fully bi-directional, with line connection at 24VDC (as provided by most PABX devices). 

   
B0001E75LC.01._SCLZZZZZZZ_.jpg Ring Master CLI

AU $349.00

RingMaster CLI incorporates all features of our popular RingMaster PRO model, plus it can also output Ten fixed CLI test transmissions, plus a User Entere CLI number.

 
 
Ring Master - Pro Ring Master PRO

AU $299.00

RingMaster PRO is our Most Popular Telephone Line Simulator, as it provides USA Dial Tone, Busy Tone and generates Standard US Ring as well as 3 Distinctive Ring Outputs.

   
B0006HPCLY.01._SCMZZZZZZZ_.jpg Ring Master STD

AU $249.00

RingMaster STD is our Standard Model Telephone Line Simulator.  It is designed for simple Telephone Line Simulation applications. It allows Two Telephone Devices to Ring Each other and Communicate. It is also Ideal for use as a Telephone Based Intercom System which can operate over a distance of up to 1 mile. It is Bi-Directional in operation and a Telephone Call is initiated by simply Lifting either receiver.