Paging Switches for ANY PBX - IP, Cloud or Analog

PAGING AMP INTERFACES

Will allow you to make Paging Announcements
from any Handset on any PBX or Line

(For ANY PBX Telephone System - Analog or SIP Connect)

Solutions

• Connection to a Public Address (PA) System from ANY PBX  (Analog, IP or Cloud)

• Can be used with IP based PBX systems                                  (FXS or Direct SIP Connection)

• Can be used with Cloud based PBX systems                           (FXS or Direct SIP Connection)

• Can be used for ANY Remote Site

Features

• Easy 'Plug In' Installation

• Supplied with a Line Isolating Transformers

• Cost Effective and Easy to Use

• Two Year Warranty

Benefits

Making announcements over a PA System from a PBX handset is an extremely important business tool. However, not all PBX systems have the ability to do this or the cost of fitting this option to a PBX can be quite expensive. In particular, many new IP based PBX solutions do not provide for Paging facilities.

Our PA Switches are designed to solve these problems, because they can be used with ANY PBX solution and they are extremely cost effective.

Our PA Switches are designed to allow a Public Address (PA) system to be connected to any PBX system, so that Announcements can be made from ANY Telephone Extension at ANY time.

THERE ARE THREE MODELS IN OUR RANGE

 For Connection to an Analog Extension, PSTN Line, FXS Port, FXO port or an ATA Analog Telephone Adaptor

1) Model PA1 – terminates the announcement after a user set period of time or when the user presses any DTMF digit on their handset on completion of the announcement.
 

2) Model PA2+ - terminates the announcement on detection of hang up tones, which occur as soon as the user hangs up.

PA2+is designed to detect standard Hang Up tones and will automatically hang up upon detection of the 3rd tone.

PA2+  can also hang up after a user set fixed period of time, or hang up when the user presses any DTMF digit on their handset.

PA2+ and PA-SIP incorporate a number of New features for 2020 :

They have an Internal Line Isolation unit (LIU), which means that you only need to connect PA2+PLUS or PA-SIP to the Amplifier with the supplied RJ11 to RCA cable.

An Anti-Pop circuit has been integrated into these new units, which will eliminate or greatly reduce the ‘Pop’ that can be experienced by a small number of Amplifiers when a Paging Call is connected.

An Anti-Hum circuit has been integrated into these new units, which will eliminate or greatly reduce the ‘Hum’ that can occasionally be induced into Audio Systems from Earth Loop issues or Electromagnetic Interference from nearby equipment.

3) Model PA-SIP - This new model is designed to connect direct to ANY Network port of an IP PBX Phone System. 

                  PA-SIP terminates the announcement on detection of hang up tones, which occur as soon as the user hangs up.

PA-SIP can also hang up after a fixed period of time or set  to hang up when the user presses any DTMF digit on their handset.

PA2+ and PA-SIP incorporate a number of New features for 2020 :

They have an Internal Line Isolation unit (LIU), which means that you only need to connect PA2+PLUS or PA-SIP to the Amplifier with the supplied RJ11 to RCA cable.

An Anti-Pop circuit has been integrated into these new units, which will eliminate or greatly reduce the ‘Pop’ that can be experienced by a small number of Amplifiers when a Paging Call is connected.

An Anti-Hum circuit has been integrated into these new units, which will eliminate or greatly reduce the ‘Hum’ that can occasionally be induced into Audio Systems from Earth Loop issues or Electromagnetic Interference from nearby equipment.

AU $399.00

For more details on this new model click here

Model PA1 INSTALLATION

1. Our PA1 Switch should be connected direct to a PBX Analog Extension, an FXS Port or an ATA . It can also be connected to a PSTN Line or an FXO Port.

2. Connect the PA1 Switch to your Amplifier 'Line In' port, using the supplied RCA cable. A Line Isolation Safety Transformer (LIU) is supplied with the RCA cable. The LIU is provided to prevent the possibility of 115V AC Voltage inadvertently connecting to PA Switch and the Telephone Line. 

3. Connect the supplied 12VDC or 12VAC Power Adaptor

4. The Default settings will suit almost all applications. However if you need a special setting, you can now program the PA Switch via DTMF tones with a standard Analog handset.

Model PA2+ INSTALLATION

1. Our PA2+ Switch should be connected direct to a PBX Analog Extension, an FXS Port or an ATA . It can also be connected to a PSTN Line or an FXO Port.

2. Connect the PA2+ Switch to your Amplifier 'Line In' port, using the supplied RCA cable.

A Line Isolation Safety Transformer (LIU) is incorporated within PA2+ Switch to prevent the possibility of  240V AC Voltage inadvertently connecting to PA Switch or the PBX System.

3. Connect the supplied 12VDC Power Adaptor.

4. The Default settings will suit almost all applications. However if you need a special setting, you can now program the PA Switch via DTMF tones with a standard Analog handset.

Model PA-SIP INSTALLATION

1. Our PA-SIP Switch should be connected direct to ANY Network Point of the IP or Cloud PBX Analog Extension.

2. Our supplied Software will automatically provide you with the full IP Address details (and MAC address) and allow you to enter the Extension Number set up for Paging.

3. Connect the PA-SIP Switch to your Amplifier 'Line In' port, using the supplied RCA cable. 

A Line Isolation Safety Transformer (LIU) is incorporated within PA-SIP Switch to prevent the possibility of  240V AC Voltage inadvertently connecting to PA Switch or the PBX System.3. Connect the supplied 12VDC Power Adaptor

4. The Default settings will suit almost all applications. However if you need a special setting, you can program the PA-SIP Switch for special requirements via our supplied Software program.

AU $399.00

EASY OPERATION

Once installed, PBX users need only :

1) Call the Extension Number (or Telephone number) that PA or PA-SIP Switch is connected to.

2) PA or PA-SIP Switch will then Answer the call and connect the call to the Paging Amplifier.

3) The User will now be able to make their PA announcement.

4) The User can then Hang Up 

For  PA2+ and PA-SIP, the User just needs to Hang Up

For Model PA1, the User should press any DTMF digit (0-9) to terminate the Page call, or it will automatically Hang up after a User Set Time.