Loading...

Intercom Accessories - Wall Mount Kits and Rain Covers

Door Phone Accessories

Surface Mounting Kits

             

Stainless Steel Surface Mounting Kits, with rain deflector are available for all DP2-DP5 door phones.

Model SMK2 - is made for the DP2 Door Phone and is available in Vertical Orientation only.

  • (8.1” H x 4.3” W x 2.6” D)
  • (110mm H x 206Wmm H x 66mm D)

Model SMK3 - is made for the DP3, DP4 and DP5 Door Phones and is available in Vertical and Horizontal Orientation.

  • (10.6” H x 5.2” W x 2.8” D)
  • (268mm H x 132Wmm H x 71mm D)

Note : Our Surface Mount Kits are made from Standard Grade (304) Stainless Steel, due to the high cost and difficulty of bending/cutting/drilling Marine Grade (316) Stainless Steel. If your SMK is exposed to high rainfall or if you live near salt water, some minor surface rusting can eventually appear. This can be prevented by treating the SMK with a high quality wax (as used on cars or boats) from time to time as necessary. Alternatively for a long term maintenance free solution, you can optionally have your SMK spray painted with long lasting 2 pot clear paint protection. Please call Natcomm for further details.

 

Door Phone Covers

      

Are available for all door phones and are recommended whenever a flush mounted door phone is exposed to direct rain.

Model DPC1 - is made for the DP1 door phone Intercom, vertical only.

  • (8.3” H x 5.7” W x 3.0” D)
  • (210mm H x 145Wmm W x 75mm D)

Model DPC2 - is made for the DP2 Door Phone Intercoms and is available in Vertical and Horizontal Orientation.

  • 8.7” H x 4.7”W  x 3.0” D)
  • (220mm H x 120Wmm W x 75mm D)

Model DPC3 - DP3, DP4 and DP5 Door Phones and is available in Vertical and Horizontal Orientation.

  • 11.2" H x 5.7" W x 3.2” D)
  • (285mm H x 145Wmm W x 80mm D)
  •  
 

Wall Mounting Boxes

        

Are available for all flush mount door phones and are designed to make installation quicker and easier.

Model WMB2 - is made for the DP2 flush mount Door Phones Intercom

  • (7.4” H x 3.3” W x 1.6” D)
  • (188mm x 83mm x 40mm Deep).

Model WMB3 - is supplied with each DP4, DP5, DP6 Door Phones Intercoms, when an SMK is not supplied            

  • 10.0” H x 3.7” W x 1.6” D)
  • (255mm x 93mm x 40mm Deep).

 
Door Phone Cover

AU $39.00

Our DPC Door Phone Cover is specifically designed to protect our DP1, DP2DP4 and DP5 Door Phones from Direct Rain when they are not mounted within a covered area. Our DPC-'s are made with strong 1/8" transparent Perspex. The correct model will automatically be supplied to suit the Door Phone you are purchasing.

   
ujpg Surface Mount Kit

AU $139.00

Our SMK Surface Mount Kit is specifically designed to allow our Flush Mount DP2, DP4 and DP5 Door Phones to be Surface Mounted. It is maufactured in Grade 304 Stainless Steel. The correct model will automatically be supplied to suit the Door Phone you are purchasing.

 

 
 
tjpg Wall Mount Box

AU $39.00

Our WMB Wall Mount Box is specifically designed to assist with the Flush Mounting of our DP2, DP4 and DP5 Door Phones. It speeds up installation and provides for very secure mounting to be wall surface. A WMB is supplied Standard with our DP4 and DP5 Door Phones and is an Option for our DP2 Door Phone.