Loading...

RI-SIP - SIP Connect Ring Indicator Controller for any IP or Cloud PBX

RI-SIP
Is designed to Alert IP or Cloud PBX users of Incoming Calls

Direct SIP Connect Incoming Ring Controller

Then Connect 1 of  3 Available Ring Alert Accessories

Designed for an IP Based PBX or IP Network

 

 

It is designed to work with our :

*  Tone Alert accessories

*  Strobe Alert accessories

*  3rd Party Equipment

Or ANY combination of the above 

 

 

Optional Accessories

 

Tone Alert

                  

 

Tone Alert sells for $99.00 incl GST

It Outputs a Pure 400Hz Telephone Ringing Tone when used with our Analogue Ring Indicator or RI-SIP Ring Indicator devices.

  • It has a Volume Adjustment Pot (underneath) and is suitable for Small Areas 100-200sqm

  • It has an Amplified 3.5mm Audio Output that can be used to meet ANY Incoming Ring Application (see below)

  • It also has a Dip Switch (underneath) to allow you to change the Cadence or Audio Frequency of the Tone Output.

  • It connects to Ring Indicator or RI-SIP with Standard Telephone wiring (only 4 wires required)

  • Tone Alert is Powered from Ring Indicator or RI-SIP, unless they are more than 300m apart in which case Tone Alert can have its own 9V or 12V input.

 

Together, these devices output a Loud Ringing Tone, that sounds just like a normal Telephone Ringing Tone.

 

 

  

 

  

 For Larger Area’s, you have several options : 

  1. Use Two or More Tone Alert Accessories. It is supplied with a Wall Mount Bracket for Easy Wall Mounting

  2. Connect an 8 Ohm Speaker to its 3.5mm Audio Output socket. This is suitable for areas up to 400sqm.

  3. Connect an One or More Amplified PC Speakers to its 3.5mm Audio Output socket. This is suitable for large Office areas.

 

For Very Large Areas (or sites with an existing Paging Amplifier)

The 3.5mm Audio Output can be connected to a Paging Amplifier and Speakers. If a Paging System already exists, then you may be able to connect it to a 2nd input if the Amplifier supports it.

 

The Just connect RI-SIP (or our Analogue Ring Indicator) to the Relay Input port of Tone Alert and a Ringing Tone will play through all Speakers connected to the Amplifier until the call is Answered or Ceases. 

 

 

Strobe Alert

 

            

 

Strobe Alert sells for $69.00 incl GST

It Outputs High Intensity Wide Angle Red LED Light whenever there is an Incoming Call

  • It is suitable for Small Areas 100-200sqm.

  • They are supplied with a Wall Mount Bracket for Easy Wall Mounting

  • Multiple Strobe Alert Accessories can be connected to RI-SIP to suit large areas or Multiple Areas.

  • It connects to Ring Indicator or RI-SIP with Standard Telephone wiring (only 4 wires required). A short cable is provided.

  • Strobe Alert is Powered from Ring Indicator or RI-SIP, unless they are more than 300m apart in which case Strobe Alert can have its own 9V or 12V input.

 

 

User Guides

 Our User Guides contains additional detailed information :

 

To DOWNLOAD a copy of our RI-SIP USER GUIDE - Click Here

To DOWNLOAD a copy of our Analog Connect Ring Indicator USER GUIDE - Click Here

Downloads

You can DOWNLOAD our NATCOMM-SIP Set Up Program by 'clicking' the  following link:                                         


                                          The NATCOMM IP Device setup Program

 

RI-SIP - SIP Connect Ring Indicator Controller for any IP or Cloud PBX

Price: AU $349.00

In stock