Loading...

Telephone Line Simulators

RING MASTER

 

 

Telephone Line Simulators

with Faxability Ring output

 

Our RingMaster Telephone Line Simulator devices are designed to allow ANY TWO TELEPHONE devices to communicate, at distances up to 2km, without the need to connect to a telecom line, which would otherwise incur call costs and tie up 2 separate telephone lines.

The RingMaster devices are compact, reliable and can be conveniently used on any test bench, or even in the field.

Operation is bi-directional so that either telephone device can make or receive telephone calls. Connection quality is loud and clear just like a telephone line, allowing for reliable Modem connection at maximum modem speeds. Connection is provided with a line voltage of 24VDC, which is the same voltage as most PABX equipment. Common applications for these devices include:

  • Testing

  • Training

  • Development

  • Demonstration

  • Production Line Quality Control Testing

 

FOUR MODELS TO CHOOSE FROM

RINGMASTER STD

RINGMASTER STD is our simplest device and is suitable for use with MOST telephone equipment. RingMaster STD allows for one attached device to ring the other device by simply lifting either receiver (ie going 'off hook').

Operation is fully bi-directional, with line voiltage of 24VDC.

As soon as the first device goes 'off hook', it will ring the other device with the standard NEW ZEALAND RING until the other device answers. Once the second device answers, RingMaster STD will provide both devices with a 'noise free' telephone line connection, so that they can communicate. Connection will cease as soon as one devices 'hangs up'.  

RINGMASTER STD does not provide 'Call Progress Tones', such as Dial Tone, Busy Tone and Hang Up tone. This means that RingMaster STD cannot be used with equipment (such as a modem) that requires 'dial tone' before they will dial. You will need to use our other RingMaster models, as described below :

 

RINGMASTER PRO

 

RINGMASTER PRO is a sophisticated device that accurately emulates all of the NEW ZEALAND telephone line characteristics, including all 'Call Progress Tones'. RingMaster PRO operates the same as a telephone exchange. Therefore when the first devices goes 'off hook', it will provide 'NEW ZEALAND Dial Tone'.

Operation is fully bi-directional, with line voiltage of 24VDC.

To initiate a call, you should press or dial 0 on either attached device. RingMaster PRO will then ring the other device with standard NEW ZEALAND RING until the other device answers. Once the second device answers, RingMaster PRO will provide both devices with a 'noise free' telephone line connection, so that they can communicate. Connection will cease as soon as one device 'hangs up', at which time it will then generate 'New Zealand Hang Up Tone'. If the other device is already 'off hook' when you attempt to make a call, RingMaster PRO will generate 'New Zealand Busy Tone'. Operation of this product is fully bi-directional.

RINGMASTER PRO provides all 'Call Progress Tones', such as Dial Tone, Busy Tone and Hang Up tone. This means that RingMaster PRO can be used with equipment (such as a modem) that requires 'dial tone' before they will dial.

RINGMASTER PRO also provides all 'Distinctive Rings' that are used in New Zealand, such as the Faxability ring, and all of the other Distinctive Ring patterns that have been defined for eventual use in New Zealand. The 4 Distinctive Ring patterns are initiated by dialling 1 through to 4, instead of the normal 0.

 

RINGMASTER CLI

Note :  This product only provides Australian Telephone Line Emulation, including Australian Dial Tone, Busy Tone and CLI.

RINGMASTER CLI provides all of the features and facilities of our RingMaster PRO device, and in addition also provides for Calling Line Identification (CLI) data transmission, which in Australia is called Calling Number Display (CND).

RINGMASTER CLI has been pre-programmed with 10 separate CLI data transmissions, consisting of a range of Telephone Number, Date and Time data that can be used to comprehensively test the detection and display facilities of equipment which supports this service. One CLI pattern also provides Alphanumeric output, which can be used to test equipment that also supports NAME data that may be sent with future CLI transmissions. RingMaster CLI will also allow you to enter and transmit your own entered telephone number.

RINGMASTER CLI data is transmitted whenever a second digit is dialled (digits 0-9). However, if only 1 digit is dialled, RingMaster CLI will not generate CLI data on this call, but will simply initiate a call with the appropriate Ring Output required (this product also provides all 'Distinctive Rings' that are used in Australia).

1 EXPORT MODEL ONLY - This device is available only in AUSTRALIAN and USA models at this time.

 

CLI OUTPUT INFORMATION

 

NUMBER INFORMATION TRANSMITTED TELEPHONE NUMBER
Dial 00 NATIONAL COMM. 04/15 14:30 0755965128
Dial 01 05/02 16:31 654321
Dial 02 06/09 18:45 03123456
Dial 03 07/18 20:52 9876543210
Dial 04 08/11 01:13 8888888888
Dial 05 09/25 05:28 3456789
Dial 06 10/30 15:04 0223456789
Dial 07 12/31 13:07 0418765432
Dial 08 01/04 09:59 O (out of area)
Dial 09 02/03 2:00 P (private)

 

 

 

RINGMASTER INTERNATIONAL

RINGMASTER INTERNATIONAL emulates the telephone line characteristics of over 20 separate countries.

Country specific Ring Output, Dial Tone, Busy Tone and Hang Up tone are provided.

Operation is fully bi-directional, with line voiltage of 24VDC (as provided by most PABX devices).

Specific Country emulation is selected by setting the position of 4 dip switches, located on the underside of the unit (see table below). Changing emulation from one country to another can be achieved in seconds.

 

COUNTRY EMULATION IS SELECTED BY DIP SWITCHES

 

LOCATIONDIP SWITCHES 1, 2, 3, 4
AUSTRALIAONONONON
USA & CANADAOFFONONON
UNITED KINGDOMONOFFONON
FRANCEOFFOFFONON
GERMANYONONOFFON
ITALYOFFONOFFON
SWEDENONOFFOFFON
SPAINOFFOFFOFFON
NETHERLANDSONONONOFF
FINLANDOFFONONOFF
BELGIUMONOFFONOFF
RUSSIAOFFOFFONOFF
INDIAONONOFFOFF
CHINAOFFONOFFOFF
JAPANONOFFOFFOFF
SINGAPOREOFFOFFOFFOFF
* NEW ZEALAND is the same as AUSTRALIA
** NORWAY, SWITZERLAND and POLAND are the same as NETHERLANDS

 

 


 
 
 You can DOWNLOAD a copy of our RINGMASTER BROCHURE and USER GUIDE  

 

by 'clicking' the Image Link below and then 'clicking' the DOCUMENTATION Tab 

 


 

 
B0006HPCLY.01._SCMZZZZZZZ_.jpg Ring Master - CLI

NZ $399.00

RingMaster CLI, provides all facilities of the PRO model and in addition will generate Caller ID (Calling Number Display) output in conjunction with any Telstra ring pattern. Provides 10 preset outputs, plus Alphanumeric & user definable transmissions.

   
B0006HPCLY.01._SCLZZZZZZZ_.jpg Ring Master - International

NZ $399.00

Our RingMaster International Version provides switch selectable dial tone, busy tone and ring output emulation for over 20 countries. Ideal for manufacturers and exporters of telecommunications Equipment.

 
 
B0006FTEHO.01-A17J55XBNDN488._SCMZZZZZZZ_.jpg Ring Master - Pro

NZ $299.00

RingMaster PRO, provides all facilities of the STD model, and in addition provides Australian Dial Tone, Busy Tone and multiple ring outputs including FaxStream Duet & Multiple Number ring. Also available with New Zealand, USA, UK, or other output.

   
B0001E75LC.01._SCLZZZZZZZ_.jpg Ring Master - Standard

NZ $249.00

RingMaster STD, will allow 2 telephone devices to ring and communicate with each other, without the need to make costly calls and occupy 2 lines. Ideal for Testing, Training & Demonstration of all analogue telephone devices.