Loading...

Message on Hold Switch for Single Telephone Lines

 

MOH
Single Line Message on Hold Switch

 

Our unique MOH devices units are intelligent switches, specifically designed to allow you to have a professional Music Or Message on Hold solution on your ordinary 'residential' type telephone line.

Once installed, you will be able to place ANY Telephone call ‘On Hold’, from ANY Telephone and you will be able to retrieve the Telephone call from the same telephone or ANY other Telephone connected to your Telephone line.

You can even use it with Cordless Telephones.

You can connect ANY type of Audio device to MOH as your Audio Source. You can use an iPod, Radio, CD Player, PC or even a dedicated Digital Message on Hold player, such as our DMC. The only requirements are that your Audio device must have a volume control and provide audio at a suitable volume for use on a Telephone line and that they connect to MOH via our supplied Line Isolation Unit (LIU), which is an ACMA safety requirement.

If you are planning to use a dedicated Digital Message on Hold player, such as our DMC device, then you should use our alternative SLS Device,  which combines the MOH Switch, DMC, LIU and Power Adaptors into a single integrated package. It is less expensive than buying the units individually and provides additional features.


TWO MODELS TO CHOOSE FROM

                                         

 

Model MOH1  will allow you to place Telephone calls on Hold from any Telephone on your line and resume calls with the same Telephone or any other telephone connected to the same line.  

MOH1 sells for $199.00 incl GST and is supplied with a Line Isolation Unit and a 12V Power Adaptor.


Model MOH2  provides all facilities of MOH1, but in addition will output a brief Reminder Ring, to all telephones connected direct to it, once the call has been On Hold for 30 seconds and then every 15 seconds thereafter until you resume the call, just as a PABX system does.

This facility is ideal for busy shops or other sites where it might be possible to forget that a call has been placed On Hold or where there could be a delay before someone is able to retrieve the call.

MOH2 sells for $249.00 incl GST and is supplied with a Line Isolation Unit and a 12V Power Adaptor.

EASY OPERATION

1.    To Place ANY Telephone call ON HOLD, press 2 on your Telephone and Hang up.

Your caller will be immediately connected to your On Hold Audio, just as if you were using a PABX system.

2.    To Resume your Telephone call, simply pick up the receiver of ANY Telephone on your line. If you are using a Cordless Phone, you should just access the Telephone line as normal.

Your caller will be immediately re-connected to your Telephone, just as if you were using a PABX system.

You can place the same call On Hold as many times as you like and you can place both Incoming and Outgoing calls On Hold.

 

 

EASY USER INSTALLATION

  1. Remove all devices from the Telephone Socket to be used.
    You can fit MOH to ANY Telephone Socket on your line. It does not have to be connected to the first telephone socket.
  2. Connect the TELEPHONE LINE IN port of MOH unit direct to the Telephone Socket to be used.
    Telephone cables are supplied with MOH.
  3. Connect your TELEPHONE to the PHONE port of MOH
    MOH will still work with any other telephones that you may use, that may be connected to other telephone sockets on your line. If you use a Cordless Phone with multiple handsets, connect the Base Station here.
  4. Connect your AUDIO SOURCE to the AUDIO INPUT port of MOH
    A Line Isolation Unit is supplied to do this. It has a standard Audio Jack on one end and the correct telephone plug at the other, allowing you to simply plug it in.
  5. Connect the supplied 12V Power Adaptor to the 12V POWER port of MOH
    You can now place calls On Hold and adjust the Audio Volume to suit.

 

You can DOWNLOAD a copy of our MOH BROCHURE and USER GUIDE  
by 'clicking' the Image Link below and then 'clicking' the DOCUMENTATION Tab

  


 
MOH1 - Single Line On Hold Switch

NZ $199.00

MOH1 will allow you to place Telephone calls on Hold from any Telephone on your line and resume calls with the same Telephone or any other telephone connected to the same line.

   
MOH2 - Single Line On Hold Switch

NZ $249.00

MOH2 provides all facilities of MOH1, but in addition will output a brief Reminder Ring, to all telephones connected direct to it, once the call has been On Hold for 30 seconds and then every 15 seconds thereafter until you resume the call, just as a PABX system does.