Loading...

Control Your Equipment By Telephone Line

                        

 

                                   RTA

                        

 Remote Telephone Activator

 WHEN YOU NEED TO CONTROL YOUR PC, GATE, NETWORK

 OR OTHER ELECTRICAL EQUIPMENT

 

TURN ON, TURN OFF, OPEN, CLOSE or RESET any Electrical Appliance

by calling a telephone line (or PABX extension) and entering a tone dial command.

 

 

Our RTA devices, when used in conjunction with one  of the accessories listed below, will allow ONE or TWO separate Electrical Devices (PC's, Networks, Locks, Gates or ANY other Electrical Device) to be SWITCHED ON, SWITCHED OFF, OPENED, CLOSED or RESET by making a telephone call.

To operate RTA, simply dial the Telephone Number of the line (or PABX Telephone Extension) to which it is connected. RTA will answer your call after 2 rings and then "listen" for a period of up to 15 seconds for control commands. You then enter the control commands (ON, OFF, RESET) by pressing numbers on your telephone.

RTA will then either CLOSE or OPEN 1 or 2 Dry Contact Relays, which in turn will Control the Accessory attached to RTA. This will allow you to Turn On, Turn Off, Open or Reset electrical equipment.

RTA can be connected to a normal Telephone Line or to ANY PABX Extension of any PSTN, ISDN or IP based PABX

RTA is also designed to connect and share your existing telephone line, when used with the FAXABILITY service. When this service is used, there is no need to use RTA on a dedicated telephone line.

RTA can also be connected to an Analogue Extension of ANY PABX (or to an FXS port or ATA device of an IP based PABX),

RTA is designed for Easy User Installation. Simply connect it to a Standard Telephone Line (or to a PABX Analogue Extension, FXS Port or ATA) with the supplied cable and then connect the appropriate control accessory.

If a 'FaxAbility Distinctive Ring Service is used, then up to 2 separate RTA units can be fitted to one line, providing for independent control of up to 4 separate electrical devices.

TWO MODELS TO CHOOSE FROM


RTA-1 SINGLE DEVICE CONTROL UNIT

Provides ONE CONTROL PORT (Dry Switch Closure) which is used to control ONE ACCESSORY device which will TURN ON, TURN OFF or RESET any PC or Electrical device.

RTA-2 DUAL DEVICE CONTROL UNIT

Provides TWO INDEPENDENT CONTROL PORTS (Dry Switch Closures) which can be used to control ONE or TWO ACCESSORY devices which will TURN ON, TURN OFF or RESET one or two PC or Electrical devices. Any combination of accessory devices can be used.

RTA FEATURES

  • PROGRAMMABLE ANSWER RING COUNT - RTA can be programmed to Answer incoming calls after ANY number of Rings.

  • PIN NUMBER SECURITY - RTA can be set up to require entry of a 3 Digit PIN number before responding to your control code. This facility will assist in the prevention of accidental or unauthorised control of your electrical equipment.

  • PROVIDES STATUS TONES - On Answer and after every DTMF command, RTA provides status tones to advise if your equipment is currently ON or OFF.

  • MULTIPLE COMMANDS - RTA will accept and action an unlimited number of commands. It will only hang up when a valid command has not been detected for 15 seconds.

  • PROGRAMMABLE RESET RELAY CLOSURE TIME - By default RTA is programmed to Close its Internal Relay for a fixed period of 2 Seconds. In some situations, 2 Seconds can be Too Short or Too Long to cause the attached Equipment to RESET correctly.RTA can be programmed have programmablethe Time that the Internal Relay closes during the RESET Command (DTMF 1 or 2). RTA1 and RTA2 Close the Relay for a fixed period of 2 Seconds. In some situations, 2 Seconds can be Too Short or Too Long to cause the attached Equipment to RESET correctly.          

ACCESSORIES

POWER CONTROL UNIT

The Power Control Unit (PCU) provides for completely safe and automatic connection or disconnection of a 240V (110VAC to 250VAC, 10 Amps) electricity supply to all attached equipment, when used in conjunction with an RTA device. This unit is designed for quick and easy user installation. Simply connect the POWER PLUG of the PCU to your electricity supply and the POWER SOCKET to your electrical equipment. The PCU then connects direct to the RTA with a supplied 'curly cord adaptor'.

PCU is available in two models.

  • PCU -1 is configured in a NORMALLY ON configuration, so that your equipment will be switched ON, unless commanded by an RTA device.
  • PCU -2 is configured in a NORMALLY OFF configuration, so that your equipment will be switched OFF, unless commanded by an RTA device.
 
 
 

PC RESET UNIT

The PC Reset Unit (PCR) provides for a remote RESET of your PC by telephone, when used in conjunction with an RTA device. It WILL NOT allow you to Switch ON or OFF your PC. Once installed, it allows remote activation of the Reset Button on your PC, without affecting the normal manual operation of this facility.

This unit is also suitable for user installation. The PCR is designed for fitting in place of a expansion socket blanking plate located at the back of your PC. The reset cable from the Reset Button is then routed to the PCR before connecting back to the motherboard. The PCR then connects direct to the RTA with a supplied 'curly cord adaptor'. Full installation instructions are provided.

 

 

 Installation Diagrams

 

RTA with a Single Power Control Unit

 

RTA with Dual Power Control Units

RTA when connected Direct to Equipment

or when used with an External Relay

 

 

 

You can DOWNLOAD a copy of our RTA BROCHURE and USER GUIDES  

by 'clicking' the Image Link below and then 'clicking' the DOCUMENTATION Tab

 

 


 
B0007YK3R4.01-A293Q5VQLXBUWR._SCMZZZZZZZ_.jpg Model PCU1 - NORMALLY ON Power Control Unit

NZ $99.00

   
Model PCU2 - NORMALLY OFF Power Control Unit

NZ $99.00

 
 
B0009A1AS2.01._SCMZZZZZZZ_.jpg PC Reset Unit

NZ $49.00

   
B00028DM96.01._SCMZZZZZZZ_.jpg RTA-1 Remote Telephone Activator - Single ...

NZ $199.00

With our RTA device, you will be able to call in to Switch ON, Switch OFF or RESET your PC, SERVER or any electrical equipment by telephone line using touch tone commands. RTA connects to any telephone line. Requires PCU or PCR accessory. Provides one control port.

 
 
B00028DM96.01._SCLZZZZZZZ_.jpg RTA-2 Remote Telephone Activator - Dual De...

NZ $249.00

With our RTA device, you will be able to call in to Switch ON, Switch OFF or RESET your PC, SERVER or any electrical equipment by telephone line using touch tone commands. RTA connects to any telephone line. Requires PCU or PCR accessory. Provides two control ports.