Loading...

Ring Indicator

Ring Indicator

 

 

Will let you know you have an Incoming Telephone Call

by Switching ON a Light, Horn or Siren


Our Ring Indicator is designed to let you know whenever there is an incoming call, by controlling electrical equipment such as a Horn or Lights, which are connected to it.

Ring Indicator is designed to TURN ON and TURN OFF the the attached electrical equipment in exact sequence with the incoming ring pattern (ring cadence) until the call is answered.

Alternatively, Ring Indicator can be set (by dip switch) to TURN ON the attached electrical equipment and leave it ON until the call is answered.

Equipment that operates on 12VDC can be connected direct to Ring Indicator.

Equipment that operates on 240VAC must be connected via the Power Control Unit accessory (see below) or a separate 240V Relay (not supplied).

 

Features

  • Lets you know when there is an incoming call in NOISY environments.
  • Easy 'Plug In' Installation
  • Cost Effective and Reliable
  • Two Year Warranty

Our Standard Ring Indicator (Model RI-1) has an Internal Relay which will automatically close and open in exact sequence with the incoming ring of an incoming call, until the call is answered or ceases.  With our Alternative Ring Indicator (Model RI-2) the Internal Relay is configured to CLOSE and will remain Closed until the call is answered or ceases.

The Ring Indicator Internal Relay provides a Dry Relay contact, rated for up to 1A at 12VDC. A junction box with screw terminals is provided, which connects direct to Ring Indicator to provide a convenient method to connect electrical equipment which can run from 12VDC.

Three inexpensive 'plug in' accessories are optionally available for use with Ring Indicator. There is a Strobe Light Accessory, A Siren Accessory (with volume control) and a 'plug in' Power Contro Unit accessory which is designed to control electrical equipment which runs from 240V.

Power input to Ring Indicator can be either12VAC or 12VDC (rated at 200mA or greater). A 12VAC power adaptor is provided with each unit.

 

Accessories

SIREN

An optional SIREN accessory is available with Ring Indicator. The SIREN accessory connects direct to Ring Indicator and does not need any external power as it is powered from Ring Indicator.

The SIREN accessory will output up to 110dB and is therefore suitable for small factories. A volume adjustment knob allows for the ideal volume to be set for individual environments.

The SIREN accessory with volume adjustment sells for $A69.00 incl GST.

 

STROBE

An optional BLUE STROBE LIGHT accessory is available with Ring Indicator. The STROBE LIGHT accessory connects direct to Ring Indicator and does not need external poweras it is powered from Ring Indicator.

It uses 6 high brightness LEDs to provide a subtle but effective FLASHING BLUE LIGHTindication that the telephone line is in use. It can be wall or ceiling mounted using the supplied screws or double sided tape. Flash rate: 60-90 per minute.

A 10 meter cable is supplied with the Strobe Light to allow it to be located remote from Ring Indicator. The cable can be easily shortened or extended if required.

The STROBE LIGHT accessory sells for $A49.00 incl GST.

 

POWER CONTROL UNIT

The optional Power Control Unit (PCU) will allow you to connect an Electrical Device such as a Light, Horn, Speaker etc, which connect to the normal 240V Electricity Supply.

PCU is designed for quick and easy 'plug in' user installation. Simply connect the POWER PLUG of the PCU to your electricity supply and the POWER SOCKET to your electrical equipment. The PCU then connects direct to Ring Indicator with a supplied 'curly cord adaptor'.

PCU is available in two models.

  • Model PCU -1 is configured in a NORMALLY ON configuration, so that your equipment will be switched ON, unless commanded by an RTA device.
  • Model PCU -2 is configured in a NORMALLY OFF configuration, so that your equipment will be switched OFF, unless commanded by an RTA device.

Note : Model PCU -2 should be used with Ring Indicator

The 240V POWER CONTROL UNIT accessory sells for $A99.00 incl GST.

 

EASY USER INSTALLATION

WITH SIREN ACCESSORY

 

 

 

 

WITH STROBE ACCESSORY

 

 

 

WITH POWER CONTROL UNIT ACCESSORY

 

 

 

You can DOWNLOAD a copy of our RING INDICATOR BROCHURE and USER GUIDE  

by 'clicking' the DOCUMENTATION Tab next to the Image below

 

 


 
 

Ring Indicator

100009923665.gif

Price: NZ $199.00

In stock

CODE: RI

Siren Accessory

Price: NZ $69.00

In stock

Strobe Light Accessory

Strobe Light Accessory

Price: NZ $49.00

In stock

CODE: STROBE